VZ 58 PISTOL 556 CZECHPOINT

VZ 58 Pistol Imported by Czechpoint .556 Caliber

• High quality barrel manufactured by Lothar Walther in Germany
• Chrome lined barrel bore
• Drilled and tapped side rail holes in receiver for do-it-yourself side rail installation for optic mounts (side rail and optic mount not included with pistol)
• Semi gloss/matte black finish cured at 300 °F over phosphate.
• 2 x 30-round magazines (will include clear and/or black magazine)
• Owner’s manual
• Cleaning kit
• Sling

Trigger Note: Pistol includes the glass-filled nylon US made trigger. If the Czech steel trigger is preferred, please scroll down to the bottom of the page to purchase the steel trigger installed and it will be installed before your pistol ships. To confirm, US made 922(r) parts are not applicable to pistols. 922(r) is only applicable to rifles.

Important Notes: The bayonet lug is not attached to the front sight base. Reason: It is not possible to fix a bayonet to the vz.58 pistol as the proximity of the bayonet lug to the gas adapter/block does not permit attachment. In addition, all vz. 58 Compact 556 pistols possess the front sight base with enclosed circle and the narrow width trigger guard (as shown in the photos). In addition, front and rear sling swivels are identical to what is shown in the photos too.

Gas Piston Notes: The Compact pistol gas piston cannot be removed without a tool. To remove the gas piston, once the upper handguard jacket has been removed, use a cleaning rod section from the cleaning kit and insert the cleaning rod into the receiver (beneath the rear sight). Push the gas piston to the rear with the cleaning rod to compress the gas piston spring and then push down on the rear of the piston that is protruding from the gas piston hole in the receiver. This action will angle the gas piston upwards, away from the gas adapter/block, and the piston can now be removed using index finger and thumb.

Pistol includes the glass-filled nylon US made trigger. If the Czech steel trigger is preferred, please scroll down to the bottom of the page to purchase the steel trigger and it will be installed before your pistol ships. Section 922(r) is not applicable to the vz. 58 Compact model as it is a pistol and not a rifle. The color of the finish is a semi gloss/matte black coating (cured at 300°F). The new production pistol barrel is made from a high alloy chrome molybdenum steel (4340) and is chrome-lined. The flash hider is removeable and the thread pattern is 14×1 right hand (standard vz.58 thread pattern).

SBR Warning: A stock can only be legally attached to this pistol after a Form-1 has been approved by BATFE. Attaching a stock to the vz.58 pistol, without an approved Form 1, is a federal felony and conviction could result in 10 years imprisonment and a $250,000 fine.

Drilled and tapped holes for the receiver side rail are included in the purchase price of the pistol. In other words, you can easily install our optional side rail by removing the two screws in the receiver and screw on the side rail with a hex/Allen wrench. Gunsmithing is NOT required to attach the side rail to our Vz. 58 pistol. Do not forget to use high strength thread-locker on the screws while attaching the side rail.